For Crestron SIMPL Windows programmers

Edit SIMPL programs by asking

Signalint lets your AI agent read and edit SIMPL Windows programs. Say what you need in plain words, click Yes when SIMPL asks to reload, and compile like always.

Claude

Add a second display in Room A that turns on and off with the primary display and mirrors its source.

signalint · edit_programDone. Added Room A › Display 2. Its power follows disp1_on and disp1_off, and disp2_source mirrors disp1_source. Backup saved. Click Yes when SIMPL asks to reload.

SIMPL Windows - [Program View]
Room A › Display 2BufferAnalog Bufferenablei1i2o1o2enablei1o11disp1_ondisp1_offdisp2_ondisp2_off1disp1_sourcedisp2_source
One ask, and the symbols and signals it adds. You look it over in SIMPL and compile.

7,500symbols

The whole symbol library from your own SIMPL install, with pin names

1,782devices

Built straight from Crestron's device list on our test PC, matching what SIMPL makes

4.30SIMPL Windows

Changed programs reloaded and compiled cleanly in our tests

Made for the programs you already have

Your SIMPL Windows jobs, as they are

Years of rooms and buildings run on SIMPL Windows programs. Signalint works right on those .smw files, the same ones you open in SIMPL every day. Nothing to rewrite, convert or move to a new platform first.

Time back

Two days of programming in about two hours

A full program for a small room takes us about two days by hand. With Signalint it takes about two hours.

By hand in SIMPL

10+ steps, mostly clicking and dragging

  1. Switch to Configure view
  2. Find TSW-1070 in the device library
  3. Drag it onto the processor's Ethernet slot
  4. Look up a free IP ID and set it
  5. Do it all again for the second panel
  6. Add the displays
  7. Add the drivers
  8. Add the endpoints
  9. Back to Program View
  10. Build the logic

With Signalint

3 steps, one of them a sentence

  1. Ask: "Add two TSW-1070s on free IP IDs, add 2 Samsung displays that mirror each other using a PS-402 switcher, 2 DM inputs and DM receivers"
  2. Click Yes when SIMPL offers to reload
  3. Compile like always

IDs picked for you, and a backup made before the change.

Work out your own hours

Start from our numbers, then move the sliders to match your jobs.

56hours back a month
Worth, at your rate$5,600
Signalint for your team$99 a month
Pays for itself after1 hour saved a month per seat

Starting numbers are our own estimate for a small room, not a measured result across shops. Change them to fit your work. Prices are for the bring your own agent plan, so your AI plan is extra.

Keep working the way you do

SIMPL stays open. Your agent does the dragging and wiring.

1

Save in SIMPL

Keep SIMPL Windows open on the program you are working on and save it, the same as before any big change.

2

Ask your agent

Say what you want in plain words: add a symbol, wire these signals, rename that group, add two touch panels.

3

Reload and compile

SIMPL sees the file changed and offers to reload it. Click Yes, look it over, and compile as you always do.

What it does today

Tested on real SIMPL Windows programs and compiled in SIMPL.

Knows the whole symbol library

Reads the roughly 7,500 symbols in your own SIMPL install, with their pin names, so it uses the real symbol and wires the right pins.

Edits that compile

Changes are written the way SIMPL writes them. In our tests the changed programs reloaded and compiled cleanly in SIMPL Windows 4.30.

Devices from Crestron's list

Panels, keypads, NVX endpoints and the rest come straight from the device database in your SIMPL install: 1,782 on our test PC, on free IDs it picks for you. A whole CP4N program rebuilt this way matched SIMPL's own file block for block. Cards and expanders go in after their parent device.

Hands back to you when it needs SIMPL

If a step has to be done in SIMPL itself, it asks you to do it and carries on by itself as soon as you press Save.

Undo any change

Every edit backs up the program first. Ask to undo, reload in SIMPL, and you are back where you were.

Your files stay on your PC

Signalint runs on your Windows PC next to SIMPL. There is no Signalint server in between, and nothing of Crestron's is shipped with it.

For service techs

Handle the call without waiting on the programmer

On a service call, a tech can open the program, ask what is going on in plain words, and make a small fix with the same backups and undo.

Why won't the projector in Room A turn on from the panel?

signalintThe panel's press goes to proj_on, but proj_on isn't wired to the projector driver's power-on input. Want me to connect it?

Where is the Lobby display's source set?

signalintIn Lobby › Display, an Analog Buffer passes lobby_src to the switcher's output 2.

Move the laptop input from HDMI 2 to HDMI 3.

signalintDone. Backup saved. Click Yes when SIMPL asks to reload, then compile and load.

Example questions from a service call.

  • Find it fastAsk what drives a signal or where a device is used instead of tracing wires across pages.
  • Fix the small stuffSwap an input, rename a signal or add a device on site, then compile and load like always.
  • Safe to tryEvery change is backed up first. If it is not right, undo it and reload.
  • Programmer stays in the loopEvery fix is backed up first, so the programmer can roll it back. A full change history with git is coming next.

Coming next

Not in early access yet.

Coming next

Start a new program from a processor

Pick a processor and get a fresh program laid out to build on. In testing now; it needs a starter file for each processor, saved once from SIMPL.

Coming next

Change history

Every change kept in a git history with who made it, when and why, so the programmer can review a service call's fixes and roll any of them back.

Coming later

Extron

After Crestron, we bring Signalint to Extron programming.

Coming later

Q-SYS

Q-SYS is on the list after Crestron too.

Bring your own agent

$99 a month per seat

Use the AI agent you already have. Plans with the agent included and the AI cost built in are coming soon.

Questions

Is Signalint made by Crestron?

No. Signalint is made by Polyology and is not affiliated with, endorsed by or sponsored by Crestron. Crestron and SIMPL are trademarks of Crestron Electronics, Inc.

What do I need to use it?

A Windows PC with Crestron SIMPL Windows installed, and an AI agent. We built and tested Signalint with Claude: it connects over MCP, with a skill that teaches Claude how SIMPL programs fit together. Signalint reads the symbol library and device list from your own SIMPL install.

How much does it cost?

With your own AI agent, $99 a month per seat, one seat for each programmer who uses it. Plans with the agent included and the AI cost built in are coming soon.

What does "bring your own agent" mean?

Signalint is the tool your agent uses to read and change SIMPL programs. On that plan the AI itself is not included: you use your own Claude plan, billed to you by Anthropic. If you would rather not, plans with the agent included are coming soon.

Can our service techs use it?

Yes. A tech on a service call can ask what a signal does or why something is not working, and make a small fix with the same backups and undo. Each person who uses Signalint needs their own seat.

Does it compile or load my program?

No. You stay in charge of that. Signalint changes the program file, SIMPL reloads it, and you compile and load it to the processor yourself.

Which versions of SIMPL Windows does it work with?

We have tested it with SIMPL Windows 4.30. Tell us what you run when you ask for early access.

Which kind of Crestron programs does it work on?

SIMPL Windows programs (.smw files), including the ones you already have. You do not need to rebuild a job on another platform to use it.

Does it work with Extron or Q-SYS?

Not yet. Crestron comes first. Extron and Q-SYS are next after that.

Does it write SIMPL+ modules?

Not today. Signalint works on SIMPL Windows programs: symbols, signals and devices.

What if I don't like a change?

Every edit is backed up first. Ask to undo it, then reload in SIMPL.

Do my programs go to your server?

No. Signalint runs on your Windows PC next to SIMPL, and there is no Signalint server in between. Nothing of Crestron's is shipped with it.

Get early access

We are opening Signalint to a small group of Crestron programmers first. Email us with what you program and the SIMPL version you use, and we will be in touch.